Timber Restore


Gorgeous wood floors in
one day without sanding!

BENEFITS OF TIMBER RESTORE

No sanding, no smell, no mess one-day service; Move your furniture back that evening
Ideal for Worn Floors; The ideal system to prepare, seal and refinish worn floors without the inconvenience of sanding.
Removes Most Scratches; Timber Restore will remove or greatly minimise almost all scratches.
 Your choice of Finish; Your choice of finish: Gloss, Satin, Matte or Ultra Matte.
Durable Coating: 2-Pack polyurethane coatings cure rapidly giving you hard wearing, scratch resistant coating.
Colour Blending: Move your furniture back that evening
Works on a wide range of floors; Timber Restore can be used on hardwood floors, engineered wood floors (floating floors), bamboo floors and cork.
Less expensive than Sanding; and no need to move out of your home for weeks

DO YOU NEED TO REFRESH OR RESTORE YOUR FLOORS?

Timber Refresh combines our deep clean process and our refresh polyurethane coating to bring dull, tired floors back to life. You wouldn't believe your floor can look this good again.
*based on a 13 square metre room size and minimum of 2 rooms.

Timber Restore is the ideal non-sanding alternate for worn floors. Our team will clean and prepare your floor for coating with our durable 2-pack polyurethane coating system.
*based on a 13 square metre room size and minimum of 2 rooms.


THE GUARANTEE

We guarantee you’ll be happy with the results of your Timber Restore service. If you’re not happy with the results in a room, then you don’t pay for that room.**

ELECTRODRY TIMBER RESTORE PROCESS

Our 5 Step process safely cleans, abrades and prepares your floor for colouring and re-finishing without any sanding dust.

1

We clean and prepare your floor with our power floor scrubber

2

Cutting pads are used to abrade the top layer of the existing finish and prepare the floor for sealing

3

We use multiple coats of our super durable, proprietary 2 pack primer to seal your floor

4

Colours are added to your floor as part of the sealing process to blend out colour variations or change the tone of your floor.

5

A high quality 2-pack polyurethane coating is applied to your floor in your choice of finish; Gloss, Satin, Matte or Ultra Matte

Frequently Asked Questions

Will Timber Restore give the same result as having my floor sanded?

The results from Timber Restore will be relevant to the condition of the floor. If your floor is in reasonable condition with average levels of wear, then we can usually achieve an amazing result with minimal difference to a freshly sanded floor. If the floor has suffered from heavy wear, then some of the wear may still be visible, but much, much less noticeable.

Will there be an odour?

The Timber Restore coatings have almost no odour. If you open a few windows in your home in the first hour then your unlikely to notice any smell at all from our coatings at all.

How much should I expect to pay?

The cost for the Timber Restore Service is between $20 and $24 per square metre depending on the size of the job and the condition of the floor. This works out to $270 to $315 per average (13 square metre) room.

Will all of the scratches be removed?

Timber Restore will remove the smaller scratches. Deep scratches will be greatly minimised and often removed. If the scratch has penetrated the polyurethane coating and reach the timber underneath, then any contamination or discolouration of the timber from moisture will still be visible.

I’m ripping my carpet up. Will Timber Restore be suitable to coat my floor?

If you floor has previously been sanded and coated with polyurethane, Timber Restore may be the perfect system for your floor. If your floor has never been sanded, then we recommend you employ a floor sander to give you the best possible result. 

 

ELECTRODRY TIMBER RESTORE BEFORE AND AFTERS

Guarantee Terms And Conditions

**Before we apply the final coat, we will ask you to inspect the floor to confirm that you’re happy with the service and result. If you are unhappy with the results in a room or area then you must advise us accoringly before the final sealing coat is applied, thus giving Electrodry the opportunity to remedy any concerns with the workmanship. For the purpose of this guarantee an area or room is considered to be a maximum floor space of 13 square metres.

SUBSCRIBE TO OUR NEWSLETTER

Sign up for email promotions, tips and special offers.