13 27 13
LIVE IN SYDNEY?

WOOD FLOOR SANDING AND REFINISHING PERTH

We Make Old Floors Look New

LOCAL SPECIALS

Enter your postcode for great
specials in your area

Our process can treat delicate floors and helps your timber last longer.

Don’t worry about dust – our dust capture system catches the vast majority of sanding dust.

Our Australian Timber Flooring Association certified technicians are proficient in making the right decisions for each floor.

You can choose the right stain or toner  for your floor from our extensive variety.

Our scratch-resistant floor coatings will protect your floor for years into the future.

We use water-based floor coatings that aren't toxic or odorous.

Healthguard™ Approved Technicians
Institute of Cleaning and Restoration Certified
Goldmorr Approved Mould Remediation Technicians
A Member of the Australasian Timber Flooring Association

Healthguard™ Approved Technicians

Institute of Cleaning and Restoration Certified

Goldmorr Approved Mould Remediation Technicians

A Member of the Australasian Timber Flooring Association

PERTH FLOOR SANDING AND POLISHING PROCESS

STEP 1

To begin, we ensure the area is clean and prepare it for sanding, including by punching protruding nails below the surface.

STEP 2

We start the sanding process by sanding with our weighted rotary sander, which can safely sand even delicate floors.

STEP 3

Continuing sanding, we move down through the sandpaper grades from coarse to smooth, removing scratches and damage as we go.

STEP 4

Next, we hand-sand the edges using a small rotary sander, and the final sand being is completed with an orbital sander.

STEP 5

The next step is to apply a barrier seal in preparation for coating. This is followed by a toner if the customer desires it.

STEP 6

The last thing we do is apply two coats of fast-drying, high density, water-based polyurethane coating that ensures a long-lasting finish.

ELECTRODRY ARE PERTH'S FLOOR SANDING EXPERTS

floor-sanding-1 floor-sanding-2  
floor-sanding-3   floor-sanding-4 

Experience Counts

Electrodry Floor Sanding Perth can be counted on to get the best results. All Electrodry’s wood floor sanding technicians are highly trained and certified by the Australian Timber Flooring Association. Electrodry has been refinishing and restoring wooden floors for years, all across Australia. Last year we refinished over 2000 timber and bamboo floors. All that experience means that Electrodry Perth’s floor sanding technicians are the best in the business.

We Don’t Cut Corners

We believe in doing a thorough job, and working with integrity. This means we don’t cut corners when sanding your floor, we don’t have hidden costs, we don’t waste time, and we communicate with you about what your floor needs.

Our Costs

You might be wondering, 'how much does it cost to sand a wood floor?' Here are our costs: There is a $30 charge to have a technician assess the job and provide a quote, but if you book the sanding job, this fee is refunded. The quote is all-inclusive, which means GST and all the costs of the job will be included.

Pricing varies across Australia, so precise pricing will be established when you book a quote. The size and condition of the floor will affect the cost, as well as optional toners and finishes. For more pricing information, email [email protected] or call us on 13 27 13.

 

FAQ ABOUT PERTH FLOOR SANDING

All furniture and personal items will need to be removed from the rooms we are sanding. If necessary, you can leave very heavy items like fridges in place, and we can work around them.

The time will vary based on the size of the job. A small job (a single room) can be done in a day. Medium jobs, up to 75 square metres should take two to three days, while the timing for larger jobs must be determined based on the size of the floor and the amount of work required. Timing will be communicated at the time of quoting the job. If we are staining the floor or doing optional extras such as whitewashing, the time required will increase by 24 to 48 hours.

Your floor will be ready to walk on the day after we finish the job, however, we recommend just walking in socks for the first 36-48 hours. Furniture can be replaced the next day, but you will need to attach new furniture pads under your furniture to prevent scratching. Heavy wheeled items must be kept off the floor for a week, as must rugs and other floor coverings.

Many floor sanding companies use a technician and a junior apprentice, and apply two or three solvent-based coatings, taking a day to dry between each coat. Electrodry uses skilled two-man crews of experienced technicians, and we use a rapid-curing two-pack floor coating that lets us apply multiple coats of polyurethane in one day. That’s how we finish the job faster!

In most cases, finding somewhere else will be your most comfortable option. This is especially important if you are pregnant or suffer from asthma, as the smells and noise from our work may be problematic. If your most important rooms aren’t being sanded, you can choose to stay in the house, but it is important to note that you will not be able to access or walk through the rooms being sanded.

While there may be odours while we are working and applying polyurethane coatings, this will dissipate quickly, and there should be almost no detectable odour within four hours. This is because Electrodry uses high-quality water-based floor coatings that have rapid curing times and create minimal odours.

Our dust capture system collects most of the dust we create while sanding. There may still be a light film of dust left on surfaces in the sanding area, but we will wipe down the surfaces as part of our process.

The sanding process will remove most damage in your wooden floor. However, some pre-existing issues may remain or could affect the final finish of your floor. These include:

1) Deep cuts in your floorboards cannot be sanded out, as the level we would have to sand the boards to would make the floor dangerously thin.

2) Weathered or water damaged floorboards may need to be replaced or may affect the tone and evenness of the end result.

3) Floors stained by urine may still have dark stains after sanding.

Electrodry Perth provides floor sanding and polishing services for hardwood and engineered wood floors. Engineered floors have a 2-3mm timber veneer over MDF board, which can be safely sanded using our rotary sanding process. It is important to note that engineered floors can only be sanded once.

Electrodry’s Timber Refresh and Timber Restore are excellent options for floors that have small scratches, are worn, discoloured or have a build-up of dirt and cleaning solutions. Both of these services take just one day and are cheaper than sanding. However, some floors need more. Electrodry Wood Floor Sanding is a great option if your floor is seriously scratched or unevenly worn. Our Wood Floor Refinishing page contains a full comparison between our different options for your floor. Whatever you choose, you can know your floor is in good hands.

ABOUT ELECTRODRY PERTH FLOOR SANDING

The Electrodry Perth team has 16 skilled technicians who specialise in different Electrodry services. We’ve had a presence in Perth for over 30 years now, and we’re a well respected name in home cleaning services. And sanding isn’t the only timber floor service we offer! If you think your floor isn’t quite damaged enough for sanding, or sanding doesn’t quite fit your budget, you should check out our Timber Refresh and Timber Restore services.

ELECTRODRY'S RANGE OF PROFESSIONAL CLEANING SERVICES IN PERTH

We are the experts in removing all kinds of stains and refreshing your dirty carpet.



Get your tiles back to their original colour, and remove black gunk from grout.



You will love the silky smooth finish on your floorboards after our Timber Refresh service.



Are your wooden floors scuffed and scratched? Electrodry’s one day service can restore them, without sanding.

 

We remove oily stains and dirt, and your lounge suite will be dry in just four to six hours.



Remove dust mites, sweat stains and contaminants, for a more hygienic mattress.



Electrodry’s technicians can remove a build-up grime in your air conditioner unit, so it will keep your home cooler without the high energy bill. 

Mould and mould spores contain poisonous mycotoxins. Get them removed from your house today, with a 12 month warranty. 

Address
1/30 Juna Dr, Malaga, Perth WA 6090

Hours
Mon, Tue, Wed, Thur, Fri, Sat: 8:00 am - 6:00pm

Sun: 8:00 am - 4:00 pm

Phone Number
13 27 13

Suburbs Serviced
Perth, Swan Valley, Fremantle, Rockhingham, Mandurah and surrounding areas

SUBSCRIBE TO OUR NEWSLETTER

Sign up for email promotions, tips and special offers.