13 27 13

LIVE IN SYDNEY?

FLOOR SANDING AND REFINISHING NEWCASTLE

We Make Old Floors Look New

LOCAL SPECIALS

Enter your postcode for great
specials in your area

Technicians Certified by the Australian Timber Flooring Association

No odour, non-toxic water-based floor coatings

Dust capture systems remove almost all sanding dust

Fast turn-around. Most jobs are completed in 48 hours, ready for use the following day

Highly scratch-resistant floor coatings

Toners and stains can be added to give the finish of your choice

Healthguard™ Approved Technicians
Institute of Cleaning and Restoration Certified
Goldmorr Approved Mould Remediation Technicians
A Member of the Australasian Timber Flooring Association

Healthguard™ Approved Technicians

Institute of Cleaning and Restoration Certified

Goldmorr Approved Mould Remediation Technicians

A Member of the Australasian Timber Flooring Association

NEWCASTLE FLOOR SANDING AND REFINISHING PROCESS

STEP 1

We start by cleaning and preparing your floor for sanding, including punching nails to below the surface of the floorboards.

STEP 2

We sand all edges by hand. This ensures the safest, smoothest finish possible on your floorboards.

STEP 3

We use a specialised weighted rotary sander to sand the floor. This extends the life of your floor by removing less timber than traditional belt sanders.

STEP 4

Next, edges and corners are detailed by hand. This is the best way to guarantee the ideal end result.

STEP 5

A barrier seal is applied to your floor, followed by a thin coat of polyurethane with toning colours, if required.

STEP 6

Last, we apply two coats of a high density, two-pack water-borne polyurethane, for a long-lasting, durable finish.

ELECTRODRY NEWCASTLE ARE THE FLOOR SANDING EXPERTS

 
   

Experience Counts

In 2018, Electrodry refinished over 2,000 wood floors. We are the only company in Australia that provides non-sanding wood floor refinishing services (see our Timber Refresh and Timber Restore services). This means we can provide you with a range of options to refinish your floor that suit your circumstances and budget.

We use a weighted rotary sander rather than a traditional belt sander, taking off less wood in the sanding process and enabling us to refinish delicate engineered timber floors without the risk of damaging the floor. When sanding your floor, we always use at least 3 grades of sanding discs (coarse, medium and fine) to give the cleanest possible finish without the risk of sanding scratches or sanding swirls.

We Don’t Cut Corners

Electrodry Newcastle Floor Sanding provides an all-inclusive floor sanding and refinishing process. This means taking the time to get the job done right!

Our Costs

How much does floor sanding cost? Well our quotes are always “all inclusive”, and GST inclusive, to ensure you don’t have any hidden surprises. We do charge a fee of $30 to inspect your floor and provide a quotation, however, this is refundable if you go ahead with the service.

The cost per square meter for floor sanding and refinishing varies between cities or states and will vary depending on the state of the floor and the work provided. If you would like a table of charges then don’t hesitate to call on 13 27 13 or e-mail [email protected] for more information.

 

Address
78-82 Nelson Street, Wallsend NSW

Hours
Mon, Tue, Wed, Thur, Fri, Sat: 8:00 am - 6:00 pm

Sun: 8:00 am - 4:00 pm

Phone Number
13 27 13

Surrounding Suburbs and Towns
Adamstown, Fletcher, Lenaghan, Sandgate, Bar Beach, Georgetown, Maryland, Shortland, Beresfield, Hamilton, Maryville, Stockton, Birmingham Gardens, Hexham, Mayfield, Tarro, Black Hill, Islington, Merewether, Tighes Hill, Broadmeadow, Jesmond, Minmi, Wallsend, Callaghan (University), Lambton, Rankin Park

SUBSCRIBE TO OUR NEWSLETTER

Sign up for email promotions, tips and special offers.