13 27 13


We Make Old Floors Look New


Enter your postcode for great
specials in your area


All Electrodry timber technicians are certified by the Australian Timber Flooring Association.

We finish jobs faster than our competitors, due to our superior, fast-drying two-pack coatings.

Our floor sanding process coats and protects your floors for years (or decades) into the future.

We keep you informed through all the steps of the job, including choosing toners or stains!

We only use coatings that are non-toxic and non-smelly, so you won’t come home to a stinky home.

Electrodry’s dust capture system ensures a dust-free finish.

Healthguard™ Approved Technicians
Institute of Cleaning and Restoration Certified
Goldmorr Approved Mould Remediation Technicians
A Member of the Australasian Timber Flooring Association

Healthguard™ Approved Technicians

Institute of Cleaning and Restoration Certified

Goldmorr Approved Mould Remediation Technicians

A Member of the Australasian Timber Flooring Association



Preparation: The first step is to prepare the area by making sure it’s clean and there are no protruding nails.


Sanding: Then, we start sanding using our weighted rotary sander. This top-of-the-line machine allows to sand even delicate floors safely.


Smooth: We continue sanding, moving from course to smoother grades of sanding discs to achieve a smooth finish.


Edges: We use a smaller, hand-held sander to sand the edges of the room, as the larger sander cannot go all the way to the edges.


Seals: The next step is for the technician to seal the floor with a barrier seal and apply optional toners or stains.


Finish: Last, the technician applies our two-pack water-based polyurethane finish to protect the floor and give it a beautiful finish.



Experience Counts

Electrodry has been Australia’s top name in home cleaning and renovation services for over thirty years. Our floor sanding technicians are all trained and certified by the Australian Timber Flooring Association. Over the decades we have amassed a wealth of experience when it comes to wooden floors. We know how to judge the best service for your floor, and how to produce the best results.

We Don’t Cut Corners

Integrity counts when it comes to this kind of job. We know that getting your floor sanded is expensive and inconvenient for you, so we make sure that we deliver the best results we can. This means state-of-the-art equipment, highly trained and qualified technicians, and the best sealers and finishes available. We look after your floor and help it last for years to come.

Devonport Floor Sanding Costs

When we give you a quote, you can know that it’s all-inclusive. Our quotes include GST and all the costs of the job. There is a $30 fee to inspect your floor and provide a quotation, but if you go ahead with the service this fee will be refunded.

The cost for floor sanding and refinishing will vary across the country, as well as varying depending on the condition of the floor and the work required for the job. If you would like a table of charges then don’t hesitate to call on 13 27 13 or email [email protected] for more information.



Electrodry timber floor sanding and refinishing Devonport are the best in Tassie! We have over thirty years of experience and are backed by a nation-wide network of experts. Our team are made up of dedicated professionals who are committed to producing excellent results for every floor sanding job. We service the whole Devonport area, including East Devonport, Miandetta, Stony Rise, Quoiba, Tugrah, Don and Spreyton. If your floor boards are worn, scratched or discoloured, call Electrodry Devonport for a quote.


All furniture and personal items will need to be removed from the rooms we are sanding. If necessary, you can leave very heavy items like fridges in place, and we can work around them.

The time will vary based on the size of the job. A small job (a single room) can be done in a day. Medium jobs, up to 75 square metres should take two to three days, while the timing for larger jobs must be determined based on the size of the floor and the amount of work required. Timing will be communicated at the time of quoting the job. If we are staining the floor or doing optional extras such as whitewashing, the time required will increase by 24 to 48 hours.

Your floor will be ready to walk on the day after we finish the job, however, we recommend just walking in socks for the first 36-48 hours. Furniture can be replaced the next day, but you will need to attach new furniture pads under your furniture to prevent scratching. Heavy wheeled items must be kept off the floor for a week, as must rugs and other floor coverings.

Many floor sanding companies use a technician and a junior apprentice, and apply two or three solvent-based coatings, taking a day to dry between each coat. Electrodry uses skilled two-man crews of experienced technicians, and we use a rapid-curing two-pack floor coating that lets us apply multiple coats of polyurethane in one day. That’s how we finish the job faster!

In most cases, finding somewhere else will be your most comfortable option. This is especially important if you are pregnant or suffer from asthma, as the smells and noise from our work may be problematic. If your most important rooms aren’t being sanded, you can choose to stay in the house, but it is important to note that you will not be able to access or walk through the rooms being sanded.

While there may be odours while we are working and applying polyurethane coatings, this will dissipate quickly, and there should be almost no detectable odour within four hours. This is because Electrodry uses high-quality water-based floor coatings that have rapid curing times and create minimal odours.

Our dust capture system collects most of the dust we create while sanding. There may still be a light film of dust left on surfaces in the sanding area, but we will wipe down the surfaces as part of our process.

The sanding process will remove most damage on your wooden floor. However, some pre-existing issues may remain or could affect the final finish of your floor. These include:

1) Deep cuts in your floorboards cannot be sanded out, as the level we would have to sand the boards to would make the floor dangerously thin.

2) Weathered or water damaged floorboards may need to be replaced or may affect the tone and evenness of the end result.

3) Floors stained by urine may still have dark stains after sanding.

Electrodry Devonport provides floor sanding and polishing services for hardwood and engineered wood floors. Engineered floors have a 2-3mm timber veneer over MDF board, which can be safely sanded using our rotary sanding process. It is important to note that engineered floors can only be sanded once.

Electrodry’s Timber Refresh and Timber Restore are excellent options for floors that have small scratches, are worn, discoloured or have a build-up of dirt and cleaning solutions. Both of these services take just one day and are cheaper than sanding. However, some floors need more. Electrodry Wood Floor Sanding is a great option if your floor is seriously scratched or unevenly worn. Our Wood Floor Refinishing page contains a full comparison of our different options for your floor. Whatever you choose, you can know your floor is in good hands.


Sign up for email promotions, tips and special offers.